Download Untitled - Studio 22

D.
If you have more than one pair of WHD100, each transmitter and receiver should be at least
6.5 feet away from one another. If both the transmitter and the receiver exist in the same room,
the suggested the distance between the two is 6.5’ (2m) minimum.
(6) TRANSMITTER/RECEIVER Status on OSD vs. buttons:
 Press the POWER button on the top of Receiver to enter “Active-Standby mode” from “Active
mode”.
- The OSD Shows: (Display 3secs and then enter Active-Standby mode.)
 Press the INFO. button on the top of Receiver, the Signal Quality, Source, Channel and
resolution will be displayed for user reference. Press INFO. button again for exit.
OSD Displayed :
HDMI1
CH10
1280x1024
= OFF
15