Download DDW-226

LED indicators
LED
ON
Status
OFF
GREEN
RED
BLINK
DC1
DC2
FRNT
RSTP
VPN
OFF
GREEN
RED
OFF
GREEN
RED
OFF
GREEN
RED
BLINK
OFF
GREEN
BLINK
OFF
GREEN
RED
Copper ports
Port 1-4
DSL ports
Port 1-2
OFF
GREEN
GREEN
FLASH
YELLOW
OFF
GREEN
GREEN
BLINK
GREEN
FLASH
YELLOW
YELLOW
BLINK
Description
Unit has no power.
All OK, no alarm condition.
Alarm condition, or until unit has started up.
(Alarm conditions are configurable,
see ''WeOS Management Guide'').
Location indicator ("Here I am!").
Activated when connected to IPConfig Tool,
or upon request from Web or CLI.
Unit has no power.
Power OK on DC1.
Power failure on +DC1.
Unit has no power.
Power OK on DC2.
Power failure on +DC2.
FRNT disabled.
FRNT OK.
FRNT Error.
Unit configured as FRNT Focal Point.
RSTP disabled.
RSTP enabled.
Unit elected as RSTP/STP root switch.
VPN disabled.
(Configurable)
Default: At least one VPN tunnel up and OK.
(Configurable)
Default: All VPN tunnels down.
No Link.
Link established.
Data traffic indication.
Port alarm and no link. Or if FRNT or RSTP
mode, port is blocked.
No SHDSL link.
SHDSL link established.
SHDSL link negotiation.
Data traffic indication.
Port alarm and no link. Or if FRNT or RSTP
mode, port is blocked.
Only during unit startup.
Firmware downloading to SHDSL chip.
Serial port, RS-232 (DCE mode)
TD
OFF
No serial data received
Serial data received
RD
GREEN
FLASH
OFF
GREEN
FLASH
Serial data transmitted
6642-22402
No serial data transmitted
17