Download Sony SNC
Transcript
Network Displays the Network menu for setting the network connection. (“Configuring the Network — Network Menu” on page 36) Security Displays the Security menu for setting the login user name and password to specify which computer(s) can connect to the camera. (“Setting the Security — Security Menu” on page 42) PTZ control Displays the setting menu for view angle and serial interface. (“Setting the PTZ control — PTZ control Menu” on page 52) Action output Displays the Action output menu for setting an action of the functions such as e-Mail (SMTP) and Edge Storage. (“Setting the Action output — Action output Menu” on page 61) Schedule Displays the Schedule menu for the e-Mail (SMTP) function, Alarm output function, Voice alert function, etc. (“Setting the Schedule — Schedule Menu” on page 70) — System Menu When you click System in the Administrator menu, the System menu appears. Use this menu to perform the principal settings of the software. The System menu consists of the following tabs: Information, Date & time, Installation, Initialize, System log and Access log. Information Tab Administrating the Camera Action input Displays the setting menu for all built-in detection functions. (“Setting the Sensor input/Camera tampering detection/Motion detection — Action input Menu” on page 53) Configuring the System Model Name The model name of the camera is displayed. Serial number The serial number of the camera is displayed. Software version The software version of the camera is displayed. Date & time Tab CLOUD Displays the setting menu for the CLOUD service. (“Setting the CLOUD service — CLOUD Menu” on page 71) Current date & time Displays the date and time set on the camera. Note After you have purchased the camera, be sure to check the date and time of the camera and set as necessary. PC clock Displays the date and time set on your computer. Date & time format Select the format of date and time to be displayed in the viewer from the drop-down list. Configuring the System — System Menu 23