Download Sony SNC
Transcript
Placing the cursor on the vertex will turn the cursor into n, and when you drag the line, the vertex will move. The arrow displayed in the center of the passing object trigger line shows the direction of inspection. Trigger is performed when an object passes the passing object trigger position in this direction. Removed object Trigger direction setting Each time you click , the trigger direction toggles among the directions left, right and both. Passing object trigger position Select the passing object trigger position from All sides, Left side, Top side, Right side and Bottom side. Administrating the Camera Left object This criterion is for whether a moving object has been removed from the trigger area. Similar to an active window, a trigger area can also be moved and vertexes can be moved, added or deleted. Trigger size Specify the minimum trigger size and maximum trigger size of motion. To specify the size, you can either enter values or drag the vertexes of the area. This criterion is for whether a moving object has been left in the trigger area. Similar to an active window, a trigger area can also be moved and vertexes can be moved, added or deleted. The size of motion is measured in pixels. • When you place the cursor on the area, the cursor changes to a crossed arrow, which you can drag to move the minimum trigger size area and maximum trigger size area. 58 Setting the Sensor input/Camera tampering detection/Motion detection — Action input Menu