1
Download Honeywell Analytics Touchpoint Pro User Manual
Transcript
MAN0923_Issue 3_04/15 Touchpoint Pro Operating Instructions 10. Specifications 10.1.3 19” 5U Remote Unit Enclosure without User Interface Part Number TPPR-V-0612 Material Mild Steel Earthing Points M8 (main grounding) other M6 Dimensions (H x W x D) 483 x 222 x 110 mm Weight 6 Kg 10.2 Wall Mounted Enclosures All wall mounted enclosures are Equipment Class 1 (grounded) and Installation Category 2, and have additional restrictions as shown under each sub- heading below. WARNING Protect the User Interface from direct exposure to precipitation and sunlight. AVERTISSEMENT Protéger l’interface utilisateur des expositions directes au soleil et de la pluie. 10.2.1 Wall Mount Controller Enclosures with User Interface These units are IP 66, Type 4 & 12, Class 1 (grounded), and can be installed indoors or outdoors in a Pollution Degree 3 environment that affords total protection from rain, snow and direct sunlight. The upper Ta may be reduced dependent on internal power dissipation. See Rating Plates for details. Part Number Material Dimensions (H x W x D) Weight TPPR-V-1210 TPPR-V-1220 TPPR-V-1230 Mild Steel Mild Steel Mild Steel 600 x 600 x 300 mm 800 x 600 x 300 mm 1200 x 800 x 300 mm 46 Kg 81 Kg 37 Kg Operating Conditions -20 to +55 °C (T ), 0 – 100 %RH (condensing) Power Supplies 100 – 240 VAC, 50/60 Hz, 0 – 20 A max. 24 VDC Nominal (18 – 32 VDC), 0 – 80 A max. a Pmax See Rating Plate 145
