Download Usermanual - piratelogic audio

Transcript
Power ratings
The 2013.01 is designed to drive impedances between 4 and 16 ohms and requires symmetrical rails between +/- 25V
to 40V depending on the driver impedance. The ready build 2013.01 modules are equipped with 2700uF/35V capacitors
and is designed to run with 4 ohm drivers on +/- 28V rails. To accommodate the usage of 8 Ohm bass drivers the low
note amplifier may be switched to bridge mode.
[todo : elaborate on the different rail voltages]
Table 1. Maximum Power Supply Voltages
Woofer impedance
Maximum VDD/VSS rails voltage
Maximum Pout @ 0.1% thd
4 Ohm
+/- 28V
68 Watt
8 Ohm
+/- 35V
38 Watt
16 Ohm
+/- 40V
19 Watt
4 Ohm bridge
+/- 20V
100 Watt
8 Ohm bridge
+/- 28V
100 Watt
16 Ohm bridge
+/- 37V
100 Watt
Please consult the LM3886 data sheet http://www.ti.com/lit/ds/symlink/lm3886.pdf and the Application Report
http://www.ti.com/lit/an/snaa021b/snaa021b.pdf for detailed information .
http://mfb.piratelogic.nl/data/docs/2013.01.usermanual.en.pdf – update 27/11/2013@11:19:31
Page 14 of 22