Download IP camera User Manual

“IP Address”，“Subnet Mask”，“Gateway”
These items were all setup before in Setup Wizard. Enter new address and click
“Apply” to change.
“IP Address”
WebCAM IP Address.
“Subnet Mask”
This item sets WebCAM Subnet Mask. The value is normally
255.255.255.0
“Gateway”
This item is to set WebCAM Gateway.
“Obtain an IP address”
This allows user to choose either to set WebCAM IP Address manually
or via DHCP.
WebCAM will reboot after the above settings have
been changed.
DNS Server IP address
“Primary DNS Server IP”
This item sets WebCAM primary DNS Server IP address.
“Secondary DNS Server IP”
This item sets WebCAM secondary DNS Server IP address. WebCAM
will use the secondary DNS Server IP address if the Primary DNS