Download Refrigerator
Transcript
LEVELING THE REFRIGERATOR AND ADJUSTING THE HEIGHT AND GAP OF THE DOORS How to level the refrigerator CAUTION • Insert a Flat-Head (-) Screwdriver into the slot in the Leveling Leg Control Lever and adjust the level by turning the Control Lever clockwise or counter-clockwise. When you rotate the Lever clockwise, you raise the refrigerator. When you rotate the Lever counter-clockwise, you lower the refrigerator. Failure to level the refrigerator may result in the refrigerator tipping over and causing personal injury. -- If the front of the refrigerator is slightly higher than the rear, the doors can be opened and closed more easily. -- When you install the refrigerator, make sure the adjustable legs touch the floor. The adjustable legs are located just behind the doors on the bottom front right and left corners of the refrigerator. Flat-blade screwdriver(-) setting up To ensure your refrigerator is stable, install it on a flat, level surface and level it according to the instructions in this section. If the Refrigerator is on a floor that is not level, it can cause a height difference between the doors. Control Lever • If the Refrigerator is not level back and front, put a solid panel (such as a plastic panel, a plastic ruler, etc.) on the floor where the rear legs will rest, and then fix it in place with plastic tape. When you push in the Refrigerator, make sure the rear legs rest on the panel. • If you have a wooden floor or similar soft floor, take care not to damage the floor when pushing the Refrigerator into place. English - 15 DA68-03194D-01.indb 15 15. 1. 8. �� 11:06