1
Download Quantum Hardware Reference Guide
Transcript
Hardware Installation Hardware Installation – Mounting Quantum Modules Overview Quantum modules, with the exception of power supply modules, can be inserted into any slot of any backplane, and, with the added exception of CPU modules, can be removed under power (hot swapped) without damaging modules or the backplane; power supply modules must be installed in the first or last slots of the backplane. Refer to the following figures and procedure when mounting modules. CAUTION Possible danger to personnel or equipment. An I/O module can only be hot swapped with the field side terminal strip removed. Failure to follow this precaution can result in injury or equipment damage. 840 USE 100 00 September 2002 723
