Download USER``S MANUAL
Transcript
3. Orient the Rear Stabilizer (3) as indicated by the sticker. 3 Set the rear of the Frame (1) on the Rear Stabilizer (3). Attach the Rear Stabilizer with two M10 x 45mm Screws (80). 80 1 3 4. Attach the Seat Handlebar (5) to the Seat Carriage (24) with four M8 x 40mm Screws (86); start all four Screws, and then tighten them. 4 86 See the inset drawing. Plug the wire on the Seat Handlebar (5) fully into the Pulse Receptacle (64) on the left side of the exercise bike. 5 86 24 64 5 7