Download USER``S MANUAL

Transcript
5. Orient the Backrest Frame (17) as shown. Insert
the Backrest Frame into the Seat Carriage (24),
below the Seat Handlebar (5).
5
88
87
24
Attach the Backrest Frame (17) with an M8 x
30mm Screw (87) and an M8 x 20mm Screw
(88); start both Screws, and then tighten
them.
5
17
6. Identify the Right and Left Accessory Trays
(46, 85).
6
Attach the Right Accessory Tray (46) to the right
side of the Seat Handlebar (5) with two M4 x
12mm Screws (75).
46
85
Attach the Left Accessory Tray (85) to the left
side of the Seat Handlebar (5) in the same
way.
5
75
8