Download USER MANUAL

24
Parameters
Light effect (mix=0.1)
Amp
Medium effect (mix=0.25)
Strong effect (mix=0.5)
0 dB
250 Hz
2435 Hz
Frequency
Figure 13: Frequency response of a Phaser module. Effect of the mix between wet and dry signal
on the frequency response.
but it starts to oscillate by an amount which increases as the Depth knob is turned clockwise.
5.2.5
Reverb
The Reverb effect is used to recreate the effect of reflections of sound on
the walls of a room or hall. These reflections add space to the sound and
make it warmer, deeper, as well as more realistic since we always listen to
instruments in a room and thus with a room effect.
The ratio between the direct sound and the room response is adjusted with the Mix knob. This
parameter is used to adjust the perceived distance between the source and the listener. In its leftmost
position, only the direct sound is heard while when fully turned to the right, one only hears the room
response.
5.2.6
The Hammer Module
The Hammer module is used to simulate the force impact produced by the
piano hammer when striking the fork of the piano. The Noise knob is used to
control the amount of noise generated during the impact between the hammer and
the fork. Turning the knob clockwise increases the amplitude of the noise.