Download HD Camcorder - Canon Cinema EOS

Recording Audio
Configuring the Built-in Microphone’s Low-Cut Filter
1 Open the [Int. Mic Low Cut] submenu.
[¡ Audio Setup] > [Audio Input] > [Int. Mic Low Cut]
76
[¡ Audio Setup]
[Audio Input]
2 Select the desired option and then press the joystick.
[Int. Mic Low Cut]
Options
[Off]:
For recording audio under usual conditions.
[LC1]:
[LC2]:
For recording mainly people’s voices.
For reducing the background sound of wind when recording
outdoors in windy surroundings (for example, on a beach or close to
buildings). Note that when you use this setting some low-frequency
sounds may be suppressed along with the sound of wind.
Selecting the Built-in Microphone’s Sensitivity
1 Open the [Int. Mic Sensitivity] submenu.
[¡ Audio Setup] > [Audio Input] > [Int. Mic Sensitivity]
[Off]
[¡ Audio Setup]
[Audio Input]
2 Select the desired option and then press the joystick.
Options
[Normal]:
[High]:
[Int. Mic Sensitivity]
Y
P
O
For recording audio under usual conditions.
For recording audio at a higher volume (+6 dB).
Activating the Microphone Attenuator
C
If the audio level is too high and the sound sounds distorted when
recording with the built-in microphone or an external microphone
connected to the MIC terminal, activate the microphone attenuator (builtin microphone: 12 dB, external microphone (MIC terminal): 20 dB).
1 Open the [MIC/Int. Mic Att.] submenu.
[¡ Audio Setup] > [Audio Input] > [MIC/Int. Mic Att.]
2 Select [On] and then press the joystick.
[Normal]
[¡ Audio Setup]
[Audio Input]
[MIC/Int. Mic Att.]
[Off]