Download KAMELYON Series HDT-1000

Transcript
KAMELYON Series
HDT-1000
High Performance
Advanced Features
•DoubleVision™ supports dual
simultaneous SD video feeds
through a single HDX-1000
transmitter.
•FadeFighter™ greatly reduces video
break-up in dense metro area
environment from a fast moving
aircraft or ground based vehicle.
Features
SD/HD Digital Video Transmitter
Overview
•High Definition / Standard Definition
The Kamelyon™ HDT-1000 digital transmitter meets the unique needs
for sending high-quality HD video, audio and data transmission in
highly demanding tactical environments. Kamelyon’s software defined
surveillance technology allows in-the-field system personality changes and
upgrades without requiring hardware modification. Designed for rapid
deployment, the rugged and compact HDT‑1000 easily meets the tactical
requirements for covert and overt surveillance of law enforcement, public
safety, homeland security, and defense operations. The Kamelyon’s low
power consumption results in extended battery life and its small size make
it ideal for concealments and portable use.
•Video / Audio / Data Transmission
The HDT-1000 transmits High Definition (HD) video with up to 1080p
resolution or Standard Definition (SD) video at 480i and supports a variety
of video frame rates. Highly efficient H.264/MPEG-4 encoding provides
real performance advantages over legacy MPEG-2 technology, including
enhanced video quality and increased signal range and reliability. Multiple
digital encryption options are available to prevent unauthorized intercepts
when security is a must.
•Multiple Encryption Algorithms
•Web Browser User Interface
•Flexible Software Defined
Surveillance
•Field upgradable Feature
•Up to 200 mW Output Power
•H.264, AVC SD/HD Encoding,
BL/ML/HL profiles
•Multi-Function inputs: Composite
Video, SDI, HD‑SDI, ASI
•Multiple Modulation Formats
•Rugged Packaging
•Compact and Lightweight
•Wide Range Voltage Input
•16 User Selectable Presets
Covert Pole Mounted
Camera/ Transmitter
Applications
•Covert Operations
•UAV / UGV
•Air–to–Ground Downlink
•Tactical / Field Response
Headquarters
Body-worn
Transmitter
•Crisis Management
RF
3G
Indoor
Concealment
IP
Covert
Receive Van
3G
Rack Mount
Receiver
Backup Units
& Public Safety
P U VISLINK
B L I C SLaw
A FEnforcement
EY
•RangeMaster™ maximizes the
transmission range, and sends video
signals up to four times farther than
COFDM/DVB-T transmission.
Specifications
General
Audio
Controls
Power Consumption
Modulation
• DVB-T (standard) 6/7/8 MHz bandwidth
• COFDM-EN300-744, QPSK, 16QAM, 64QAM
• RangeMaster - Narrow Band, programmable,
1-10 MHz bandwidth QPSK
• LMS-T 10 MHz COFDM (optional-consult
factory)
Encryption (Available Options)
• AES 128/256 bit key
Line Level
• Line or Microphone (x2)
• 600 Ω unbalanced
MIC Level
• –57 dB, REF 1V/Microbar
• 5KΩ unbalanced
Phanton Power
• 4.5 Vdc
Local Interface
L & S Band
• 10 Watts max.
C-Band
• 12 Watts max.
X-Band
• 14 Watts max.
Frequency Parameters
Frequency Stability
• 2.5 ppm
Frequency Step Size
• 250 KHz
Band Support
Band
Frequency
P
300 to 400 MHz
L
1.7 to 1.9 GHz
S
2.0 to 2.5 GHz
C1
3.1 to 3.5 GHz
C2
4.4 to 5.0 GHz
C3
6.425 to 6.525 GHz
For Custom Bands (Consult Factory)
Video Encoding
H.264/MPEG-4
• SD/HD (standard feature)
AVC/MPEG - 4 (Part 10)
Profiles supported:
• Baseline profile
• Main profile
• Hi-Profile
Video Bit Rates
• Up to 12 Mbps maximum
• 7 button local interface for control
LED Indicators
•
•
•
•
•
•
Power Output
RF Output (High Power Mode)
• 200 mW (+23 dbm)
RF Output (Low Power Mode)
• 20 mW (+13 dbm)
Preset Number
Audio Input Level
RF Power Level
Encryption
Video presence
Alarm
Options
• Heat sink - for extended temperature range
(1.5” x 2.49” x 1.06”)
• AC Power Supply
• Breakout Cable - specify Mic or Line Level
Remote User Interface
• RS-232, 10/100Base-T Ethernet
Standard Equipment
Configurable Presets
• 16 user selectable configurations
Environmental
Power Source
Operating Temperature
• –10º C to +55 ºC [14º F to 149º F]
(Extended temperature range with optional
heat sink)
Storage Temperature
• –40º C to +75 ºC [–40º F to 167º F]
Humidity:
• 0 to 95% relative, non-condensing
Altitude
• 20,000 feet/ 6000 meters
• DC Power Connector and Breakout Cable
• CD ROM User Manual
Regulatory
DC Input
• +10 to +32V
• FCC Parts 15,90
Connections
Interface
RF Output
Mechanical
Material
• Aluminum housing, anodized
Dimensions
• 4.125” W x 2.87” L x 0.675” H
10.48cm W x 7.29cm L x 1.71cm H
Weight
• 0.75 lbs (340 g)
Video
Input
• Video A - NTSC/PAL Composite
• SD-SDI or HD-SDI (configurable)
• ASI - Input from external encoder
• Video B - NTSC/PAL Composite
(MPEG-4 DoubleVision mode only)
Control / Audio
• RS232: I/O for remote control panel or PC interface
• Wayside Data Input
• Audio 1 & 2 Input
Set-up & Maintenance
(10/100 web browser interface)
DC Power
• DC Power Input: +10 to +32V
Video Input Format
Analog Composite
(1 V p/p TIA/EIA RS170)
• 720 x 480i NTSC 525
• 720 x 576i PAL 625
SDI
(SMPTE 259M - 270 Mbps)
• 720 x 480i @ 25/30fps
• 720 x576i @ 25/30fps
HD-SDI
(SMPTE 292M - 1.5 Gbps)
• 1920 x1080p @ 24, 25, 29.97, or 30 FPS
• 1920 x 1080i @ 24, 25, 29.97, or 30 FPS
• 1280 x 720p @ 50, 59.94, or 60 FPS
ASI
• 188 byte, EN50083-9
Wayside Data
• Up to 115.2 kbps (serial)
Video Input Impedance
• 75Ω unbalanced
3.925”
9.97 cm
2.87”
7.29 cm
2.67”
6.8 cm
RD000576 Revision 1
© 2012 Vislink Group. All rights reserved. All other products or services referenced herein are
identified by the trademarks or service marks of their respective companies or organizations.
Note: Vislink reserves the right to change specifications without notice. Please contact your
representative to confirm current specifications. 6 / 8 / 2011
www.vislink.com
Connector Type
SMA Female
BNC Female
(Configurable)
21-Pin Receptacle
RJ-45 (10/100)
4-pin LEMO female
4.125”
10.48 cm
.675”
1.71 cm