Download - Schneider Electric
Transcript
PowerLogic® Circuit Monitor Series 4000 Reference Manual Appendix C—Abbreviated Register Listing 63230-300-212B1 12/2005 Table C–3: Abbreviated Register List (continued) Reg 1164 1165 1166 Name Alternate True Power Factor, Phase A Alternate True Power Factor, Phase B Alternate True Power Factor, Phase C Size 1 1 1 Type Integer Integer Integer Access RO RO RO NV N N N Scale xx xx xx Units 0.001 0.001 0.001 Range Notes 0 – 2,000 (-32,768 if N/A) Derived using the complete harmonic content of real and apparent power (4wire system only). Reported value is mapped from 0-2000, with 1000 representing unity, values below 1000 representing lagging, and values above 1000 representing leading. 0 – 2,000 (-32,768 if N/A) Derived using the complete harmonic content of real and apparent power (4wire system only). Reported value is mapped from 0-2000, with 1000 representing unity, values below 1000 representing lagging, and values above 1000 representing leading. 0 – 2,000 (-32,768 if N/A) Derived using the complete harmonic content of real and apparent power (4wire system only). Reported value is mapped from 0-2000, with 1000 representing unity, values below 1000 representing lagging, and values above 1000 representing leading. Derived using the complete harmonic content of real and apparent power. Reported value is mapped from 02000, with 1000 representing unity, values below 1000 representing lagging, and values above 1000 representing leading. 1167 Alternate True Power Factor, Total 1 Integer RO N xx 0.001 0 – 2,000 1168 Displacement Power Factor, Phase A 1 Integer RO N xx 0.001 1,000 -100 to 100 (-32,768 if N/A) ➀ Derived using only fundamental frequency of the real and apparent power. 4-wire system only 1169 Displacement Power Factor, Phase B 1 Integer RO N xx 0.001 1,000 -100 to 100 (-32,768 if N/A) ➀ Derived using only fundamental frequency of the real and apparent power. 4-wire system only 1170 Displacement Power Factor, Phase C 1 Integer RO N xx 0.001 1,000 -100 to 100 (-32,768 if N/A) ➀ Derived using only fundamental frequency of the real and apparent power. 4-wire system only 1171 Displacement Power Factor, Total 1 Integer RO N xx 0.001 1,000 -100 to 100 ➀ Derived using only fundamental frequency of the real and apparent power 1172 Alternate Displacement Power Factor, Phase A 0 – 2,000 (-32,768 if N/A) Derived using only fundamental frequency of the real and apparent power (4-wire system only). Reported value is mapped from 0-2000, with 1000 representing unity, values below 1000 representing lagging, and values above 1000 representing leading. 1173 Alternate Displacement Power Factor, Phase B 0 – 2,000 (-32,768 if N/A) Derived using only fundamental frequency of the real and apparent power (4-wire system only). Reported value is mapped from 0-2000, with 1000 representing unity, values below 1000 representing lagging, and values above 1000 representing leading. 1174 Alternate Displacement Power Factor, Phase C 0 – 2,000 (-32,768 if N/A) Derived using only fundamental frequency of the real and apparent power (4-wire system only). Reported value is mapped from 0-2000, with 1000 representing unity, values below 1000 representing lagging, and values above 1000 representing leading. 1 1 1 Integer Integer Integer RO RO RO N N N xx xx xx 0.001 0.001 0.001 RO = Read only. R/CW = Read configure writeable if in a setup session. NV = Nonvolatile. ➀See “How Power Factor is Stored in the Register” on page 178. ➁See “How Date and Time Are Stored in Registers” on page 178. 184 © 2005 Schneider Electric All Rights Reserved