Download 3.8 MB - Juniper Networks

To control whether the cookie is stripped, type the command:
dx%
set cluster <name> sticky passheader [disabled | enabled*]
When enabled, the cookie is passed through; when disabled, the cookie is stripped:
Configuration Instructions for Client IP-Based Stickiness
To choose client IP-based stickiness, use the following commands:
dx%
dx%
set cluster <name> sticky method clientip
set cluster <name> sticky clientip timeout [1-43200]
The range of timeout values is 1 minute to 43200 minutes (30 days).
You can select the appropriate method for hashing depending upon whether the DX
appliance is deployed in front of a public web site or in front of an intranet site. The
command used to set this parameter is:
dx%
set cluster <name> sticky clientip distribution <internet | intranet>
For optimum performance for a public web site, set to “internet” using the
command:
dx%
set cluster <name> sticky clientip distribution internet
For optimum performance for an intranet web site, set to “intranet” using the
command:
dx%
set cluster <name> sticky clientip distribution intranet
To display the sticky settings for this cluster:
dx%
show cluster <name> sticky
To disable clientIP-based client stickiness, set the sticky method to none:
dx%
set cluster <name> sticky method none
Configuration Instructions for Client IP-Based Stickiness „ 157