Download GUI Graphical User Interface: EAGLE20/30

Basic Settings
1.4 Load/Save
 Configuration encryption
Parameters
Active
Set Password
Delete
Meaning
Shows whether the device configuration is encrypted and there is a
password to make unauthorized access more difficult.
Possible values:
 not selected
The device configuration is unencrypted and can be read without a
password.
 selected
The device configuration is encrypted and has a password.
Displays the "Set Password" dialog. Enter a new password and, if
applicable, the existing password.
 The device encrypts the device configuration and uses a password to
make unauthorized access more difficult.
 The device only accepts another device configuration during
activation if the password used there matches the password set.
 Before replacing a defective device, prepare the new device as
follows, if the device loads the device configuration from the external
memory (ENVM) during a restart:
 Start the new device with the standard device configuration
(default configuration).
 Enter the currently used password in the new device.
 Install the active external memory of the defective device in the
new device.
 In the table, select the device configuration located on the external
memory (ENVM).
 Click "Activate" to transfer the device configuration to the volatile
memory (RAM).
The device immediately uses this device configuration in the
current operation.
Shows the "Delete" dialog. Enter the currently used password to neutralize
the password protection.
Table 16: "Load/Save" dialog, "Configuration Encryption" frame
30
RM GUI EAGLE20/30
Release 1.0 10/2012