Download DTSC-200 ATS Controller Installation

Manual 37385
DTSC-200 - ATS Controller
Discrete Inputs
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
Discrete Inputs: Bipolar Signals
The discrete inputs are electrically isolated allowing for a bipolar connection. The discrete inputs are able to handle positive or negative signals.
NOTE
All discrete inputs must use the same polarity, either positive or negative signals, due to the common
ground.
Discrete Inputs: Positive / Negative Signal
Power supply Power suppply + (8 to 40 Vdc)
50
Power suppply + (8 to 40 Vdc)
52
Power suppply + (8 to 40 Vdc)
53
Power suppply + (8 to 40 Vdc)
54
Power suppply + (8 to 40 Vdc)
55
Power suppply + (8 to 40 Vdc)
56
Power suppply + (8 to 40 Vdc)
57
Power suppply + (8 to 40 Vdc)
58
Power suppply + (8 to 40 Vdc)
59
Power suppply + (8 to 40 Vdc)
60
Power suppply + (8 to 40 Vdc)
61
Power suppply + (8 to 40 Vdc)
62
51
Discrete input 1
Discrete input 2
Discrete input 3
Discrete input 4
Discrete input 5
Discrete input 6
Discrete input 7
Discrete input 8
Discrete input 9
Discrete input 10
Discrete input 11
Discrete input 12
Figure 5-25: Discrete inputs - alarm/control input - positive signal
© Woodward
Page 27/41