Download Elnet TXT

CHAPTER 6 — Communications
Pin Designation
Description
COM –
1
– of RS485
COM +
2
+ of RS485
Earth/Ground
Table 6-5 Connections
6 4 — Communication Settings
To enable the User to connect the ElNet Energy & Power
Multimeter to a PC master computer for successful
communications, the Communication Setup parameters of both must
match; i.e. the port of the PC master and the configuration settings
of the Powermeter.
Address
Baud Rate
Parity
Stop Bit
6.4.1 — Address
Each Powermeter in a communication system must have it’s own
unique address.
Because the ElNet Energy & Power Multimeter works on
MODBUS, the available addresses are from ‘1’ to ‘31’
Page 70
ElNet TEXT Energy & Power Multimeter