Download User Manual - Marvel-tec

3 inches Facial & Fingerprint Recognition Series Product User Manual 2. WIFI Configuration Before the mobile phone is accessed to the WLAN, other physical components of the 802.11 network are required, including access points, distribute systems, and wireless media. In addition, the service set identifier (ESSID) must be available. Network ID: specifies the network identification of the wireless network to be accessed. (Letters are case­sensitive.) Local IP address: If the 802.11 wireless network is not configured with the function of dynamic host configuration protocol (DHCP), enter the Manual IP Designation interface and input an IP address, subnet mask, and gateway address. Otherwise, dynamically designate an IP address. Password: The password must be the same as that of the router so that the mobile phone can access to the WIFI. IP address: When the setting of a local IP address is in manual mode, designate and input a correct IP address, subnet mask, and gateway address on the Manual IP Designation interface. The designated IP address is the IP address of
46