Download TRobot user manual

systatus
BBBBBBBB
HHHHu
system status
bit 0 - low voltage
bit 1 - block error
(controller,lid,cooler)
bit 2 bit 3 bit 4 - remote control error
bit 5 - memory error
bit 6 - software error
0 ... FF
tempform
C
HHHHu
temperature format of
'A'
tempinc
±DD.DD
HHHHs *
set temp. increment/C
0 .. ±20.00
timeinc
DDD
HHHHu
set time increment /s
0 .. 240
timeoutlen DDD
HHHHu
length of timeout
0 .. 255 (*64ms)
DDD
HHHHu
waiting time of repeat function 0 .. 254 (*64ms)
if crc16-check is selected
waittime
6.10.1 Examples
Query of block temperature
:b 1;l
6 Bytes
in mnemonics
:BLCK 1;TEMP
12 Bytes
6.11 Error codes
Error codes consist of three decimal numbers. The first sign determines the error group.Variable
numerical values of several formats in this description are represented by format signs,
beginning with ”%”.
Examples:
%4x ; hexadecimal, 4 digit
%2d ; integer, 2 digit
%5f1 ; decimal value, signed, 5 digit altogether, consisting of 3 integer digits, decimal
;point and 1 post-decimal digit.
All error texts end with “!”.
See also chapter 6.2.3.2.
Special error code:
!?
checksum error
6.11.1 Error Group 0xx: System Errors
001
002
003
004
005
006
56
remote control off!
Error %4x %4x %4x %4x %4x %4x %4x
wait: too cold!
cooler too hot!
no printer!
no heated lid!
; remote control not activated
; software error, system halted
; cooler too cold
; cooler too hot
; no printer available
; heated lid not connected
Instruction Manual TRobot 10/2009