Download Untitled

tached.
Help - If you would like to know more about using the
genie you can scan the QR code and head straight
to the support section on our website. Here you will
find tutorials and you can also get in touch with us to
solve any other questions you may have.
About - Shows the model of Genie you have as well
as the current version of the firmware.
Auto Off - Sets the waiting time before the unit powers down automatically when not being used. We
recommend to keep this function active.
Sound - Turns the internal speaker ON/OFF
Time - Adjust to match the current time in your region.
Exit - To exit the settings menu just press back, all
changes will be saved.
11.0 Updating firmware
Firmware on the device is user-updateable, latest
firmware releases can be found at:
www.syrp.co.nz/support
Warning, when you instal new firmware you
will lose all custom presets!
- Download the firmware update from the support
page at www.syrp.co.nz.
- Copy the downloaded file to a formated USB Key /
Stick.
- Insert the USB Key / Stick into the Genie.
When the update is complete the Genie will restart.
Note: USB Hard drives or devices that draw high current cannot be used to update the firmware. Use a
USB stick / key to perform the update. Also ensure
that the USB key / Stick is completely empty accept
for the update file.
12.0 Known firmware issues
We worked hard to get the firmware running on the
Genie as stabily as possible for the first release, But
there are some known issues. Always insure that you
have the latest frimware installed in your Genie.
Firmware version 1.6
Editing video presets. When changing the parameters
and re saving an existing video preset the preset
becomes unusable. Please make a new preset rather
than editing the existing presests in video mode.
Date - Adjust to match the current date in your region.
Frame Rate - Adjust base frame rate to match your
workflow for shooting, This will determine how other
parameters are calculated on the device. Typically
this is 30fps for North America and 25fps for European
Countries.
Shutter signal - This is the time that the Genie sends
a signal to the camera to tell it to take a photo. Defualt
setting is 200ms
Auto Focus - The time in which the Genie instructs
the camera to ‘Auto Focus’ for. The defualt setting is
off.
- Press and hold the back button, then tun the Genie
on by pressing the ‘OK’ button.
Load factory defaults - Reset the settings back to factory parameters. All presets and other user settings
will be lost.
- Release both buttons once the Genie display starts
flashing. The Genie will read the data on the USB Key
/ Stick and update the firmware to the version at-
14