Download Configuration and programming software (CAPS)

UM0225
3 Designing with CAPS
If the test fails, the dialog shown in Figure 38.: Link connect test error dialog displays. (A
similar dialog displays for the RLink option).
Figure 38. Link connect test error dialog
Press OK to continue, and check the physical connections between your PC and target
board by performing a loopback test.
4.
Note:
Click the Target Connect Test button to test communication from your PC through the
JTAG chain on the target board.
)
s
t(
It is recommended that link and connectivity tests be run before attempting any JTAG
operations.
c
u
d
o
r
P
The dialog shown in Figure 39.: Target connectivity test dialog displays, showing the
preliminary steps required for a successful test.
e
t
le
Figure 39. Target connectivity test dialog
)
s
(
ct
o
s
b
O
-
u
d
o
If the JTAG chain on the target board successfully responded, a message displays
indicating the test passed. Press OK to continue.
r
P
e
If the test fails, the error message shown in Figure 39.: Target connectivity test dialog
displays.
t
e
l
o
Figure 40. Target connect test error dialog
s
b
O
41/56