Download NICMOSlook An Interactive Spectrum Extraction Program for
Transcript
3.2. THE USER INTERFACE
21
The following buttons are available on the plot window:
Measure FWHM With this button, areas on the plot window can be selected with
the mouse. Selection is terminated by using the RIGHT mouse button on the last
coordinate of desired region. A gaussian is tted to each selected region and the plot
is replaced with panels containing the results. To return to the original plot, push
Re-plot . See gure 3.3 for an example.
Measure FWHM - output to PS The same procedure as above, but the output will
go to a Postscript le instead of the screen.
The plot type can be selected with one of these switches:
{ Linear
{ Log
{ Log!linear
Replot Redisplay the plot popup window.
Plot to PS File Write the plot currently displayed to a Postscript le.
Data to File Data currently display on the screen will be written to a data le when
this button is selected.
Done This button closes the plot popup window and returns control to the main
NICMOSlook window.
Plot Popup Window: FWHM
See the above section for a description of the buttons available on this plot popup.
3.2.7 Spectrum Popup Window
When any of the menu items selected from Spectra that do not direct output to a le are
selected, a spectrum plot popup like the one in gure 3.4 will appear.
The following buttons are available on the spectrum plot window:
Replot Redisplay the plot popup window.
Plot to PS File Write the plot currently displayed to a Postscript le.
Save to FITS Data currently display on the screen will be written to a data le
when this button is selected.