Download General Information

Transcript
Description
•
My radius server accepts authentication request from the client with "Auth: Login
OK:...", but the user cannot log on. The bad replies counter is incrementing under radius
monitor
This situation can occur, if the radius client and server have high delay link between them. Try
to increase the radius client's timeout to 600ms or more instead of the default 300ms! Also,
double check, if the secrets match on client and server!
Page 354 of 612
Copyright 1999-2005, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.