Download User`s Manual

OVERVIEW
The CyberPower Step-Down and Isolation Transformers support installation with hardwire (OL6KRT2UTFHWIO / OL10KRT2UTFHWIO /
OL6KRT2UTFHWIOR / OL10KRT2UTFHWIOR), and are designed for a variety of CyberPower UPS systems. When combined with the UPS, the Step-Down
configuration converts voltage from 200-240V down to 100-120V. The Isolation configuration provides the UPS and connected equipment from any outside
utility line fluctuations or interference.
UNPACKING
Flat head screws: M5X8L (8) * 1 set
Pan head screws: M5X12L (12) * 1 set
2U Step-Down and Isolation Transformer
Plastic washers (8) * 1 set
User’s manual
Registration card
Screw hole dust covers (10) * 1 set
Rackmount left rail
Rackmount right rail
Cable for 6K UPS output to 6K STF input connection (1)
(Only for 6K STF)
Tie plate (1) * 1 set
Conduits with internal wires for 8K/10K UPS output to
2U Rackmount ears (Stands) (2) * 1 set
10K STF input connection (1)
(Only for 10K STF)
Cable glands (2)
Input/output terminal block cover (1)
1
Copyright © 2014 CyberPower Systems, Inc.