Download DMS - DE Shaw Research
Transcript
Desmond Users Guide, Release 3.4.0 / 0.7 The harmonic dihedral term given in Equation (7.2) can lead to accuracy issues if fc is too small, or if initial conditions are poorly chosen due to a discontinuity in the definition of the first derivative with respect to i in φijkl near φ0 ± π. Table 7.5: Schema for the improper_harm table. name phi0 fc p0 p1 p2 p3 type FLOAT FLOAT INTEGER INTEGER INTEGER INTEGER description equilibrium separation (DEGREES) force constant (ENERGY / DEGREE2 ) 1st particle 2nd particle 3rd particle 4th particle These terms are in the improper Hamiltonian category. 7.2.5 CMAP torsion terms CMAP is a torsion-torsion cross-term that uses a tabulated energy correction. It is found in more recent versions of the CHARMM forcefield. The potential function is given by: Vc (φ, ψ) = 4 4 X X Cnm n=1 m=1 ψ − ψL ∆ψ n−1 φ − φL ∆φ m−1 where Cnm are bi-cubic interpolation coefficients derived from the supplied energy table, φ is the dihedral angle formed by particles p0 . . . p3, and ψ is the dihedral angle formed by particles p4 . . . p7. The grid spacings are also derived from the supplied energy table. Terms in torsiontorsion_cmap are handled by this potential function. The cmap tables for each term can be found in cmapN, where N is a unique integer identifier for a particular table (multiple cmap terms in torsiontorsion_cmap can refer to a single cmapN block). The format of the cmap tables consists of two torsion angles in degrees and an associated energy. cmap tables must begin with both torsion angles equal to -180.0 and increase fastest in the second torsion angle. The grid spacing must be uniform within each torsion coordinate, but can be different from the grid spacing in other torsion coordinates. More information can be found in [Bro-2004]. Table 7.6: Schema for each of the tables holding the 2D cmap grids name phi psi energy type FLOAT FLOAT FLOAT description phi coordinate (DEGREES) psi coordinate (DEGREES) energy value (ENERGY) The CHARMM27 forcefield uses six cmap tables, which have names cmap1, cmap2, ..., cmap6 in DMS. 7.2. Bonded, pair, and excluded interactions 53