Download Tuning Tool User Manual - EFILive Server
Transcript
EFILive V7 Tuning Tool for GM Vehicles
APPENDIX-B
STOICHIOMETRY
EFILive has the ability to display commanded fuel tables in any one of three units: AFR, EQRatio or
Lambda.
AFR
When working with Air Fuel Ratios (AFR), stoichiometry defines the amount of air required to
completely combust the fuel. For petrol the Stoichiometric value is 14.7. That means it takes 14.7 parts
of air for each part of fuel in order to burn the fuel completely. Too much air and there will be air
remaining after all the fuel is combusted (lean), too much fuel and there will be unburnt fuel remaining
after all the air is consumed (rich).
When working with flex-fuel vehicles you should always work in either Lambda or EQRatio
since the AFR can never be accurately known.
Just because the theoretical stoichiometric value for fuel and air is 14.7 does not mean the PCM will
always use 14.7. In fact in most cases it is calibrated to use a value that is close but not quite 14.7
The stoichiometric value used by the PCM is defined in one of two ways:
1. As calibration {B3601}
Or if that calibration is not configured in the PCM (most late models do not have that calibration)
then
2. As the constant 14.63
[email protected]
- 100 -
www.efilive.com