1
Download LTPP Manual for Profile Measurements and Processing
Transcript
ACCELEROMETER CALIBRATION CHECK, BOUNCE TEST, AND TEXTURE DYNAMIC CHECK FORM FORM COMP-3 Region STATIC AND DYNAMIC BOUNCE CHECK Initial Static Dynamic Final Static Segment 2 Segment 4 Segment 7 IRI (m/km) IRI (m/km) IRI (m/km) IRI Pass IRI Pass Seg. 4 - Seg. 2 (m/km) (Y/N) Seg. 7 - Seg. 2 (m/km) (Y/N) LEFT (ODS 1) RIGHT (ODS 2) CENTER (ODS 3) COMMENTS ACCELEROMETER CALIBRATION ACCELEROMETER ZERO G NEG. 2 G DIFFERENCE Left-ODS 1 Right-ODS 2 Center-ODS 3 COMMENTS TEXTURE SENSOR CALIBRATION CHECK Performed with van on first step of ramp SENSOR MPD (mm) PASS (Y/N) Left -Texture (ODS 4) Right-Texture 2 (ODS 5) 267 PASS (Y/N)
