Download G Data MailSecurity MailGateway

G Data MailSecurity
Configuration of G DATA MailSecurity MailGateway (Outgoing
(SMTP))
Process outgoing email: ON
IP addresses of servers that can send outgoing email: <IP mail
server>
Use DNS to send email: ON
Terms
<IP mail server> = IP address of the computer on which the mail
server is installed.
<IP G Data MailSecurity> = IP address of the computer on which
G Data MailSecurity MailGateway is installed
System requirements
To use G Data MailSecurity, the following hard disk space is required:
Mail Gateway: 20 MB plus temporarily stored email (recommended: at
least 50 MB free)
Administrator: 2 MB
Prerequisites for using G Data MailSecurity Administrator: Pentium PC
with Windows XP, Windows Vista, Windows 7, Windows Server 2003,
Windows Server 2008, Windows Server 2008 R2 operating system, 32 MB
RAM
Prerequisites for G Data MailSecurity MailGateway: Pentium PC with
Windows XP, Windows Vista, Windows 7, Windows Server 2003,
Windows Server 2008, Windows Server 2008 R2 operating system, 256
MB RAM, CD-ROM drive, Internet access
?
8
G Data MailSecurity can also run on 64 bit Windows operating
systems.