Download Accela Open Autosampler - Getting Started Guide

© 2011 Thermo Fisher Scientific Inc. All rights reserved.
The following are registered trademarks in the United States and possibly other countries: Agilent and
ChemStation are registered trademarks of Agilent Technologies Inc. Analyst is a registered trademark of AB
Sciex Pte. Ltd. Cheminert is a registered trademark of Valco Instruments Company, Inc. Kalrez is a registered
trademark of E.I. du Pont de Nemours & Company. PAL™ is a trademark of CTC Analytics AG. Ryton is a
registered trademark of Chevron Phillips Chemical Company. Simriz is a registered trademark of Carl
Freudenberg KG Corporation. Windows is a registered trademark of Microsoft Corporation.
Empower and MassLynx are trademarks of Waters Corporation. PEEK is a trademark of Victrex plc.
All other trademarks are the property of Thermo Fisher Scientific and its subsidiaries.
Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the
product operation. This document is copyright protected and any reproduction of the whole or any part of this
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.
The contents of this document are subject to change without notice. All technical information in this
document is for reference purposes only. System configurations and specifications in this document supersede
all previous information received by the purchaser.
Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or errorfree and assumes no responsibility and will not be liable for any errors, omissions, damage or loss that might
result from any use of this document, even if the information in the document is followed properly.
This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of
Sale shall govern all conflicting information between the two documents.
Release history: Revision A, April 2010; Revision B, March 2011.
Software version: Xcalibur 2.1 or later; LC Devices 2.5.0.
Firmware version: 4.1.2 or later.
For Research Use Only. Not for use in diagnostic procedures.