Download Audio Embedder

Transcript
Advanced Operation
Commands
#show_udp_remote_port
The #show_udp_remote_port command displays the remote UDP listening port.
Use the #set_udp_remote_port to set the remote UDP listening port.
Syntax:
#set_udp_rport param1
Parameters:
None
Example:
#show_udp_remote_port
REMOTE UDP COMMUNICATION PORT IS 50008
#use_udp_enable
The #use_udp_enable command enables or disables UDP access mode.
Syntax:
#use_udp_enable param1
Parameters:
param1
Value[0 ... 1]
Value
Description
0
Disable UDP
1
Enable UDP
Example:
#use_udp_enable 1
UDP ACCESS IS ENABLED
page | 32