Download Audio Embedder

Transcript
Advanced Operation
Commands
#show_gateway
The #show_gateway command displays the current gateway address of the switcher.
Use the #sgateway command to set the gateway address.
Syntax:
#show_gateway
Parameters:
None
Example:
#show_gateway
GATEWAY ADDRESS IS: 192.168.1.5
#show_http_port
The #show_http_port command displays the current HTTP listening port of the switcher.
Use the #set_http_port command to set the HTTP listening port.
Syntax:
#show_http_port
Parameters:
None
Example:
#show_http_port
HTTP COMMUNICATION PORT IS: 82
page | 41