Download EDAC Electronics Ltd

EDAC SMS 300 User Manual
Page 21 of 47
Fig 5.2.2a EDAC 300 Series Configuration Manager
The window in Fig. 5.2.2b will appear.
Fig 5.2.2b Connection Settings – COM Port
Select the COM port, or the Windows dial-up modem to be used to connect to the EDAC SMS 300.
If a COM port is selected choose the baud rate for the connection from the ‘Baud Rate’ list. Note that by default
the RS-232 COM port on the EDAC SMS 300 is set to work at ‘9600’. This setting should not be changed unless
the COM port on the EDAC SMS 300 has been configured to work at a different speed (see section 7.7 for more
information on changing the RS-232 COM port properties)
If a Windows dial-up modem is selected as shown in Fig 5.2.2c, enter the CSD number (see section 3.1.3 for
more information on CSD data numbers) of the remote unit that is to be configured, in the phone number field.
Fig 5.2.2c Connection Settings - Modem
www.edacelectronics.com
© 2005-2007 EDAC Electronics Ltd