1
Download VARIABLE SPEED CNB MANUAL
Transcript
R.J.W. LTD. Hand CNB 23-09-14 USER MANUAL 6B. Setting specimen Axial Position 1 2 Load 10mm specimen into clamp assembly so that the specimen is contacting the axial adjusting screw Check axial position and broach a specimen 3 4 Check axial position and re-adjust position if required Always tighten the locking nut, so securing the axial adjusting screw position PLEASE VIEW OUR WEBSITE www.blackscharpy.com for consumables & spare parts © R.J.W. LTD. 2014 ALL RIGHTS RESERVED SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 3
