Download Neutron Engineering Inc.

Neutron Engineering Inc.
5.10.5 TEST SETUP
EUT
AC
Source
Magnetic
Field
Tester
Note:
TABLE-TOP EQUIPMENT
The equipment shall be subjected to the test magnetic field by using the induction coil of standard
dimension (1 m x 1 m). The induction coil shall then be rotated by 90 degrees in order to expose
the EUT to the test field with different orientations.
FLOOR-STANDING EQUIPMENT
The equipment shall be subjected to the test magnetic field by using induction coils of suitable
dimensions. The test shall be repeated by moving and shifting the induction coils, in order to test
the whole volume of the EUT for each orthogonal direction. The test shall be repeated with the coil
shifted to different positions along the side of the EUT, in steps corresponding to 50% of the
shortest side of the coil. The induction coil shall then be rotated by 90 degrees in order to expose
the EUT to the test field with different orientations.
Report No.: NEI-EMC-3-1311C165
Page 81 of 92