Download Overview
Transcript
Drivers & Utilities (Win 8.1) Chapter 4: Drivers & Utilities (Win 8.1) This chapter deals with installing the drivers and utilities essential to the operation or improvement of some of the computer’s subsystems. The system takes advantage of some newer hardware components for which the latest versions of most available operating systems haven’t built in drivers and utilities. Thus, some of the system components won’t be auto-configured with an appropriate driver or utility during operating system installation. Instead, you need to manually install some system-required drivers and utilities. What to Install The Device Drivers & Utilities + User’s Manual disc contains the drivers and utilities necessary for the proper operation of the computer. Table 4 - 1, on page 4 - 4 lists what you need to install and it is very important that the drivers are installed by the method outlined in this chapter, and in the order indicated. Note that the information included on the following pages is for Windows 8.1 only. See “Drivers & Utilities (Windows 7)” on page E - 8 for information on drivers and utilities for the Windows 7 (64-bit with Service Pack 1) operating system. Module Driver Installation The procedures for installing drivers for the Wireless LAN and Combination Bluetooth & WLAN modules are provided in “Modules & Options” on page 6 - 1. Driver Installation & Power When installing drivers make sure your computer is powered by the AC/DC adapter connected to a working power source. Some drivers draw a significant amount of power during the installation procedure, and if the remaining battery capacity is not adequate this may cause the system to shut down and cause system problems (note that there is no safety issue involved here, and the battery will be rechargeable within 1 minute). What to Install 4 - 1 4