Download 4 - Siemens

Operating the C7 (General)
6.4
Entering Values
Overview
You enter the values to the C7 by using input fields. There are various types
of values which you enter in various ways:
S Numeric values
S Alphanumeric values
S Symbolic values
Input of General
Values
In general follow the procedure outlined below:
Step
Action
Result
1.
As described on page 6-11, branch initially to the screen you require and then
to the corresponding screen entry.
The required screen is displayed.
2.
Using the cursor keys, select the input
Cursor is positioned on the input
field you require within the screen entry. field.
3.
Enter the required value. Depending on The input field is flashing.
the field configuration, you can input the
values listed under ”Overview”.
4.
Confirm your input with
ENTER
Cancel incorrect input with
5.
6
The value is accepted and the
input display stops flashing.
The original value is automatically re-entered into the field.
Position the cursor with the cursor keys dto.
to the next field and follow the same procedure.
You can also use the cursor keys to move
the cursor to the left or right of the previous input field to insert a different
value into it.
6.
Close the screen by pressing
C7–623, C7–624 Control Systems
C79000-G7076-C624-01
The display is reset and changed
back to the previous screen.
6-15