Download User guide

Gamatronic Electronic Industries Ltd.
2.
Select Module conf.:
[Main Menu > SETUP > (password) > Ent]
1>
2>
3>
4>
Alarm set
Module conf.
Battery
Charge
5>
6>
7>
8>
Time
9> Silicon
Site
Password #1
Service
Figure 145: Setup menu
8.9.1
1.
Setting Number of Phases
Select Num of phase:
[Main Menu > SETUP > (password) > Module conf.]
1.
2.
3.
4.
Num of phase
Module/s frequency
Module/s voltage
Update Vo/Fr/ph
5.Output Adjust
6.Frequency Limits
7.DC Calibration
8.AC Calibration
Figure 146: Module Config. setup menu
8.9.2
1.
Setting Module/s Frequency
Select Module/s frequency:
[Main Menu > SETUP > (password) > Module conf.]
1.
2.
3.
4.
Num of phase
Module/s frequency
Module/s voltage
Update Vo/Fr/ph
5.Output Adjust
6.Frequency Limits
7.DC Calibration
8.AC Calibration
Figure 147: Module Config. setup menu
2.
Use the ▲▼arrow keys to set the module/s frequency, press Ent, and then Esc:
[Main Menu > SETUP > (password) > Module conf. > Module/s frequency]
--SET MODULE/S FREQUENCY
--SELECT – 1 HARD (DIP DEPEND.)
SELECT – 2 SET 50HZ
(SELECTED)
SELECT – 3 SET 60HZ
Figure 148: Setting the Module/s frequency
88
POWER+ 3x208 V, User Guide, Release 2.3