Download User Manual - Ocean Controls

KTA-282 Modbus TCP Weather Station Gateway
Continue the set up process by connecting all necessary cabling. A generic set up is shown in the diagram below
(depending on your particular product, connections may differ slightly).
Figure 1: Typical weather station set up
Configuring the KTA-282
Connection
Vs
COM
D+
DGND
Male D9
RJ45 Socket
OC1
OC2
Description
Power Positive (8 to 28V DC; 100mW)
Power Negative (Ground)
RS-485 Data +
RS-485 Data Ground
Serial communications (RS-232) between KTA-282 and Weather station via
WeatherLink cable
Ethernet Port
Open Collector Output 1
Open Collector Output 2
Table 2: Connections to the KTA-282
7/05/2013
www.oceancontrols.com.au
Page 4 of 25