Download User Manual - LUCKINSlive

Transcript
TSX SCY 11601/21601
Section 4.7
Module Visual Diagnostics
Module Visual Diagnostics
Visual Module Diagnostics
General
Three LEDs are located on the front panel of TSX SCY 11601/21601 modules. These LEDs
display information on the module’s operating status and on the communication status of the
built-in serial link.
The host channel’s communication status is set by the ERR and COM LEDs in the PCMCIA cards
(see page 114) on the serial or Fipway link.
LED meaning:
RUN
ERR
CH0
Comments
(1)
(1)
Module powered-down or module failure
No communication on the built-in channel
(2)
(1)
Communication on built-in channel
Serious fault on built-in channel
Configuration fault.
No device OK on the channel
Device fault on built-in channel (only for TSX SCY 21601)
Self-tests running
Key:
Off
On
84
Flashing
(1) Neutral status
(2) Line activity display
35006178 10/2013