Download Using the Touch Pad

Setup Utility
83
Boot Menu
Boot priority order:
1: USB FDD:*1
2: IDE HDD: xxxxxxxxxx
3: USB CDD: MATSHITA xxxxxxx
4: PCI LAN: xxxxxxxxxx
5:
6:
7:
8:
Excluded from boot order:*2
: USB KEY
: USB HDD
: USB LS120
*1
*2
Use the Panasonic USB floppy disk drive (optional: CF-VFDU03)
The devices under [Excluded from boot order] are not booted.
To change the boot order
To move up, select the device with and , and then press F6.
To move down, select the device with and , and then press F5.
To move the device from [Excluded from boot order] to [Boot priority order] or vice versa, select the device with
then press X.
To return to the default setting, press 1.
NOTE
The default order is [USB FDD] -> [IDE HDD] -> [USB CDD] -> [PCI LAN].
To boot from the following devices, make the settings as below.
To boot from
• Internal CD/DVD drive
• USB connected device
• LAN
You need to set
: [CD/DVD Drive] to [Enable] ( page 81)
[USB Port] and [Legacy USB Support] to [Enable] (
[CD/DVD Drive Power] to [On] ( page 80)
: [USB Port] and [Legacy USB Support] to [Enable] (
: [LAN] to [Enable] ( page 81)
page 81)
page 81)
In the [Boot] menu, the names of the connected devices (including internal devices) will be displayed.
“USB CDD: MATSHITA UJXXXXX XXXX” is the internal CD/DVD drive.
If more than one of the same device is connected, only one device name will be displayed.
and
, and