Download Z-Wave Technical Basics-small

Transcript
69
These required command classes are called mandatory command classes and
they are individual of certain generic and specific device classes.
Above and beyond the mandatory device classes, Z-Wave devices can support
further optional command classes. They may be very useful but the standard
does not enforce the implementation of these classes.
A Z-Wave manufacturer is allowed to implement an unlimited number of optional
device classes, however if these device classes are implemented, the standard
defines how these commands and functions are to be supported.
Figure 4.4: Optionally, recommended and mandatory Command
Classes within a device class
The basic device class, the generic and, if available, the specific device
class is announced by the device during inclusion, using a Node
Information Frame.
As well as the device classes, the Node information frame also
announces all optional command classes of the device included.
With this announcement, a controller can control and use an
included Z-Wave device according to its functionality.