Download SoMat eDAQ

SoMat eDAQ
19 CE Compliance
The following section provides important notes on the CE compliance of the eDAQ
hardware and cables.
19.1
eDAQ Hardware
CAUTION
Do not remove any CE-labeled component or modify a CE-labeled component from
its original condition. Do not disassemble individual layers. HBM cannot ensure the CE
compliance of any hardaware that has been modified.
The only recent modification to the eDAQ for CE compliance is on the back panel of
analog-out enabled EHLS and EBRG layers. The Analog Out connector cutout is left
unpainted to ensure solid metal-to-metal contact between the internal and external
connectors.
19.2
Cables
CAUTION
HBM cannot ensure the CE compliance of any cable that has been modified from its
original condition.
The following cables have been recently modified to be CE compliant. All other cables
are also CE compliant.
• SAC-EPWR15 Power Cable (1-SAC-EPWR15-2)
• SAC-EXT-VBM Vehicle Bus Module Extension Cable (1-SAC-EXT-VBM-2)
• SAC-TRAN-AO Analog Out Transducer Cable (1-SAC-TRAN-AO-2)
I2740-1.1 en
247