Download User Manual

GPS/GSM CAR ALRM SYSTEM
Operating Instruction
GPS/GSM CAR ALRM SYSTEM
GPS/GSM CAR ALARM
&TRACKING SYSTEM
Catalogue
1. Technical Specification……………………………………2
Operating Instruction
1. Technical Specification
2. Feature & Functions………………………………………3
No.
Article
Technical Data
3. Operation…………………………………………………..4
1
2
Position Mode:
Data
Communication
Mode
Frequency Range (MHz)
Supply voltage
Supply range
Standby current
Static current:
Peak Current:
Work Temperature:
Working humidity:
Size of the Mainframe:
GPS（With GPS SiRF-Star III chipset）
SMS
4. System Setup……………………………………………..7
5. Installation And Wire Diagram…………………………..12
6. How To Search Your Vehicle Position………………….18
7.Common Problems and solutions………………………22
3
4
5
6
7
8
9
10
11
900/1800 or 850/900/1800/1900MHz
12V DC
10~24V DC
≤150mA
≤ 30mA
≤ 300mA
-20~70℃
20% ~ 80%
14.5×8.5×3.5 CM
How to recode the Transmitter
In disarm status, open the car door, then switch the ignition key between
ON & OFF positions for at least 15 times. When the main unit’s LED
turns on, the main unit will send out one sound “Bi”, it means that the
system is in programming status. In the next 10 seconds, please press
the any key on the transmitter, if you can hear “Bi Bi” sounds, it means
that the transmitter has been programmed. In the second 10 seconds,
you could program the second transmitter with the same process. If
there is no any signal from the transmitter in 10 seconds, then the
system will automatically quit out programming status, and send out 3
sounds “Bi Bi Bi”
-1-
-2-