Download DVR User Manual

NVR User Manual
5.2.2 Main Monitor
The main monitor settings allow you to set camera sequence in live display mode.
Operate the following steps to set main monitor:
Step 1: Enter into MenuSetupLive Main Monitor interface. Refer to Fig 5-7:
Step 2: Select display mode and channel.
Step 3: Select dwell time. Click
button to setup the dwell time of the previous channel.
Click
button to set the dwell time of the latter channel groups.
Step 4: Click “Apply” to save the setting.
Fig 5-7 Live Configuration-Main Monitor
5.2.3 Mask
If there is something you don‟t want to display in the live image. You can set mask. For a
given channel a maximum of three areas can be masked. If the mask function is not available
in the added IP camera, the mask function here will not take effect.
To setup mask area:
Step 1: Enter into MenuSetupLive Mask interface.
18