Download User manual - User Manuel
Transcript
4.1. Data Export (Figur 6 – Data Export Form) The data recorded between the start date and time of the first activity and the stop date and time of the last activity of the activities list can be exported from this form. The data exported is determined by which check boxes in the “Data type udvalg” are checked. By selecting “Alt Data” (default) in the “Udtræk kriteria” section all sampled data for the selected data types is exported. When “Kun Aktivitet Data” is selected only the data (all of the columns listed in Figure 5) defining the activities listed will be exported. Data can be exported as either ASCII text files or CSV (excel) files selected from the “Fil udlæsning type” section, and the delimiter between data columns can be defined by the selection in the “Data afgrænser” section. 5. Graphs Graphs for each type of data sampled (Navigation, DMI Metrologisk and Ferry Box) can be viewed for each activity. For special case types of gears (CTD) additional graphs can be viewed, these are described later. The graphs for the Activity section display the data that was recorded during that activity. This part is build up so you will get ether 1 or 4 graphs on the screen. See figure 7. There are 3 buttons to be used for each of the graph. See figure 8. The magnifying glass gives the possibility to zoom in/out of a graph. The second button gives the possibility to look at the raw data behind the chosen graph. See figure 9 and 10. The last button gives the possibility to save the desired graph as a JPG-image.