Download in-circuit emulators

System Configuration
MINICUBE2
USB cable
Host machine
Target cable
(single wire)
Power supply
CD-ROM
(Integrated debugger, etc.)
( Emulation probe
Flexible emulation probe
A
B
Pin header
( Exchange adapter
Adapters used to convert IECUBE pins to target
connector pins for each device
A: For 10 pins and 16 pins, B: For 20 pins and 30 pins
A
B
( Target connector
Connectors used to mount the device in the target system
A: For 10 pins and 16 pins, B: For 20 pins and 30 pins
On foot pattern of target device
(Target system)
Accessory
-Tyyzz product configuration
When using the target cable (single wire), mount the male pin header in the connector in the
target system.
L Recommended target pin header
Specifications: 0.635 mm (L), 0.635 mm (W) (6 mm (H))
All the components excluding the host machine, target system, and pin header are included with
the QB-78K0SKX1.
Refer to page 28 for detailed functions of on-chip debug emulator MINICUBE2.
Configuration Example
QB-78K0SKX1-ZZZ configuration
IECUBE
Target cable
(30 single wires)
USB cable
Power supply
CD-ROM
MINICUBE2
QB-78K0SKX1-Tyyzz configuration
+
QB-78K0SKX1-ZZZ
configuration
B
A
+
B
A
+
Emulation probe
QB-50-EP-01T
Exchange adapter
A: For 10 pins and 16 pins
B: For 20 pins and 30 pins
Target connector
A: For 10 pins and 16 pins
B: For 20 pins and 30 pins
Remark yy: Pin count
zz: Package
Refer to Microcontroller Development Tools Selection Guide (U18459E) (to be released) for the development environment for devices when using IECUBE.
Pamphlet U1855EJ2V0PF
27