Download User Manual - CNET Content Solutions

StruxureWare Data Center Expert 7.2.2
Check APC Website
Click to see if any new or updated DDF files are
available from APC.
Local File
Click to download a DDF file stored on a local
computer.
Browse
Click to browse to the DDF file on the local
computer.
"Select DDF Files" display
Use this display to select the DDF files you want to download from APC.
Element
Description
Select the DDF files that you want to download
from APC from the list of available DDFs.
List
Each listing shows the currently installed
version and whether a new or updated
version is available.
Installed: The DDF version matches the
server's file.
Updated: The DDF is an updated version of
the server's file.
New: The DDF file is not installed at the server.
Click to download the selected DDF files.
Next
"Installed/Updated DDF Files" display
Use this display to verify that all DDF files were downloaded successfully.
Global Scan Settings option
Use this option to define the global scan settings that the StruxureWare Data Center
Expert server will use for its communication with its monitored SNMP devices.
Element
Description
Select how much time will pass between
StruxureWare Data Center Expert server scans
for status information at a monitored SNMP
device, when the Device Settings option in the
"SNMP Device Communication Settings display"
has Default selected for that device's Scan
Interval (minutes) setting.
Note: Setting the scan interval below the default
value of five minutes can adversely affect
performance when the StruxureWare Data
Center Expert server is managing a large number
of devices.
Scan Interval
228