Download GREENHOUSE USER MANUAL

MIDDLE ASSEMBLY CONTINUED
STEP FOUR
4.12 Before you attach the 602A’s to the sides of
the greenhouse you will need to loosen the ML01
(nut) attached to the L08C-X and the base. See
diagram .
609
601B
1. Once the bottom of one L08C-X is loosened set
the 602A onto the bolt of the the L08C-X. Be sure
that the 602A is sitting flush on top of the base kit.
See
for reference.
2. Hold the 602A in place and attach the top of
the 602A to the 609 using S04/ML01 (nut and
bolt). As shown in
.
3. Repeat steps 1. and 2. on all four corners where
the L08C-X ‘s meet the base kit.
L08C-X
BA-S2
4. Now attach the bottom of 602A to the Base
using a S04/ML01 (nut and bolt) as shown in
,
and to the 609 with an S04/ML01 combo as is
shown in
.
602A
L08C-X
Inside View
609
602A
602A
ML01/S04
BA-S2
ML01/S04
602A
L08C-X
Inside View
29
BA-S2
C-X
L08 e
e
c
Slid o pla
int
S04
ML01
Inside View
Loosen only one L08C-X at a time.